Зидарство — разлика између измена

Садржај обрисан Садржај додат
.
Ред 10:
 
== Бетонски блок ==
[[ImageДатотека:CMUs.jpg|thumb|250px|ConcreteБетонске masonryзидне unitsјединице (CMUsCMU) or blocksили inблокови aу basementзиду wallподрума beforeпре burialзатрпавања.]]
Blocks of cinder concrete (''[[Concrete masonry unit|cinder blocks]]'' or ''breezeblocks''), ordinary concrete (''[[Concrete masonry unit|concrete blocks]]''), or hollow tile are generically known as Concrete Masonry Units (CMUs). They usually are much larger than ordinary bricks and so are much faster to lay for a wall of a given size. Furthermore, cinder and concrete blocks typically have much lower [[water]] absorption rates than brick. They often are used as the structural core for veneered brick masonry or are used alone for the walls of factories, garages, and other [[Industrial Style|industrial-style]] buildings where such appearance is acceptable or desirable. Such blocks often receive a [[stucco]] surface for decoration. Surface-bonding [[cement]], which contains synthetic fibers for reinforcement, is sometimes used in this application and can impart extra strength to a block wall. Surface-bonding cement is often pre-colored and can be stained or painted thus resulting in a finished stucco-like surface.
 
Блокови од синдер бетона (''[[Concrete masonry unit|синдер блокови]]'' или ''breezeblocks''), обичног бетона (''[[Concrete masonry unit|бетонски блокови]]'') или шупљих плочица су генерално познати као јединице за бетонско зидање (CMU). Обично су много веће од обичних цигли и стога се много брже постављају за зид дате величине. Штавише, блокови од шљунка и бетона обично имају много нижу стопу апсорпције [[water|воде]] од цигле. Често се користе као структурално језгро за зидање од фурнираних цигала или се користе самостално за зидове фабрика, гаража и других зграда у [[Industrial Style|индустријском стилу]] где је такав изглед прихватљив или пожељан. Такви блокови често добијају [[stucco|штукатурну]] површину за декорацију. [[Цемент]] за површинско везивање, који садржи синтетичка влакна за ојачање, понекад се користи у овој примени и може дати додатну чврстоћу зиду блока. Површински везивни цемент је често претходно обојен и може се фарбати, чиме се добија готова површина налик штукатури.
The primary structural advantage of concrete blocks in comparison to smaller clay-based bricks is that a CMU wall can be reinforced by filling the block voids with [[concrete]] with or without steel [[rebar]]. Generally, certain voids are designated for filling and reinforcement, particularly at corners, wall-ends, and openings while other voids are left empty. This increases wall strength and stability more economically than filling and reinforcing all voids. Typically, structures made of CMUs will have the top course of blocks in the walls filled with concrete and tied together with steel reinforcement to form a bond beam. [[Bond beam]]s are often a requirement of modern [[building code]]s and controls. Another type of steel reinforcement referred to as [[ladder-reinforcement]], can also be embedded in horizontal mortar joints of concrete block walls. The introduction of steel reinforcement generally results in a CMU wall having much greater lateral and tensile strength than unreinforced walls.
 
Примарна структурна предност бетонских блокова у поређењу са мањим циглама на бази глине је да се CMU зид може ојачати попуњавањем празнина у блоку [[бетон]]ом са или без челичне [[rebar|арматуре]]. Генерално, део шупљина је намењен за попуњавање и ојачање, посебно на угловима, крајевима зидова и отворима, док се друге празнине остављају празне. Ово повећава чврстоћу и стабилност зида економичније него попуњавање и ојачавање свих празнина. Типично, структуре направљене од CMU-а ће имати горњи слој блокова у зидовима испуњеним бетоном и повезаним челичном арматуром како би се формирала спојна греда. [[Bond beam|Спојне греде]] су често захтев савремених [[building code|грађевинских прописа]] и контрола. Друга врста челичне арматуре која се назива мердевинаста арматура такође се може уградити у хоризонталне малтерне спојеве зидова бетонских блокова. Увођење челичне арматуре генерално доводи до тога да CMU зид има много већу бочну и затезну чврстоћу од неојачаних зидова.
"Architectural masonry is the evolvement of standard concrete masonry blocks into aesthetically pleasing concrete masonry units (CMUs)".<ref>{{Cite web|title=ARCHITECTURAL CONCRETE MASONRY UNITS|url=https://ncma.org/resource/architectural-concrete-masonry-units/|access-date=2020-06-18|website=NCMA|language=en-US|archive-date=2020-06-21|archive-url=https://web.archive.org/web/20200621082615/https://ncma.org/resource/architectural-concrete-masonry-units/|url-status=live}}</ref> CMUs can be manufactured to provide a variety of surface appearances. They can be colored during manufacturing or stained or painted after installation. They can be split as part of the manufacturing process, giving the blocks a rough face replicating the appearance of natural stone, such as [[brownstone]]. CMUs may also be scored, ribbed, sandblasted, polished, striated (raked or brushed), include decorative aggregates, be allowed to slump in a controlled fashion during curing, or include several of these techniques in their manufacture to provide a decorative appearance.<ref>{{Cite web |url=http://www.ncma.org/resources/productuse/products/concrete/Pages/GroundFaceUnits%28Burnished,Honed%29.aspx |title=Ground Face Units (Burnished, Honed) |access-date=2009-11-21 |archive-url=https://web.archive.org/web/20090521200939/http://www.ncma.org/resources/productuse/products/concrete/Pages/GroundFaceUnits(Burnished,Honed).aspx |archive-date=2009-05-21 |url-status=dead }}</ref>
 
"Architectural„Архитектонско masonryзидање isје theкоришћење evolvementстандардних ofбетонских standardблокова concreteза masonryзидање blocksу intoестетски aestheticallyугодне pleasingбетонске concreteзидне masonry unitsјединице (CMUsCMU)".<ref>{{Cite web|title=ARCHITECTURAL CONCRETE MASONRY UNITS|url=https://ncma.org/resource/architectural-concrete-masonry-units/|access-date=2020-06-18|website=NCMA|language=en-US|archive-date=2020-06-21|archive-url=https://web.archive.org/web/20200621082615/https://ncma.org/resource/architectural-concrete-masonry-units/|url-status=live}}</ref> CMUsCMU-ови canсе beмогу manufacturedпроизвести toда provideобезбеде aразличите varietyизгледе of surface appearancesповршине. TheyОни canсе beмогу coloredфарбати duringтоком manufacturingпроизводње orили stainedнакон or painted after installationуградње. They can be splitМогу asсе partподелити ofкао theдео manufacturingпроизводног processпроцеса, givingдајући theблоковима blocksгрубо aлице roughкоје faceреплицира replicatingизглед theприродног appearance of natural stoneкамена, suchкао asшто је [[brownstone|смеђи камен]]. CMUsCMU-ови mayтакође alsoмогу beбити scoredнарезани, ribbedребрасти, sandblastedпескарени, polishedполирани, striatedпругасти (rakedрабљени orили brushedбрушени), includeукључити decorativeукрасне aggregatesагрегате, beдозволити allowedим toда slumpсе inслегну aна controlledконтролисан fashionначин duringтоком curing,очвршћавања или orукључити includeнеколико severalод ofових theseтехника techniquesу inсвоју theirпроизводњу manufactureда toби provideсе aобезбедио decorativeдекоративни appearanceизглед.<ref>{{Cite web |url=http://www.ncma.org/resources/productuse/products/concrete/Pages/GroundFaceUnits%28Burnished,Honed%29.aspx |title=Ground Face Units (Burnished, Honed) |access-date=2009-11-21 |archive-url=https://web.archive.org/web/20090521200939/http://www.ncma.org/resources/productuse/products/concrete/Pages/GroundFaceUnits(Burnished,Honed).aspx |archive-date=2009-05-21 |url-status=dead }}</ref>
"Glazed concrete masonry units are manufactured by bonding a permanent colored facing (typically composed of polyester resins, silica sand and various other chemicals) to a concrete masonry unit, providing a smooth impervious surface."<ref>{{cite web |url=http://www.ncma.org/resources/productuse/products/concrete/Pages/Glazed%28Prefaced%29Units.aspx |title=Glazed (Prefaced) Units |access-date=2009-11-21 |url-status=dead |archive-url=https://web.archive.org/web/20090521200923/http://www.ncma.org/resources/productuse/products/concrete/Pages/Glazed%28Prefaced%29Units.aspx |archive-date=2009-05-21 }}</ref>
 
"Glazed„Глазиране concreteбетонске masonryзидне unitsјединице areсе manufacturedпроизводе byвезивањем bondingтрајне aобојене permanent colored facingоблоге (typicallyобично composedсастављене ofод polyesterполиестерских resinsсмола, silicaсилицијумског sandпеска andи variousразних otherдругих chemicalsхемикалија) toна aбетонску concreteзидану masonry unitјединицу, providing aобезбеђујући smoothглатку imperviousнепропусну surfaceповршину."<ref>{{cite web |url=http://www.ncma.org/resources/productuse/products/concrete/Pages/Glazed%28Prefaced%29Units.aspx |title=Glazed (Prefaced) Units |access-date=2009-11-21 |url-status=dead |archive-url=https://web.archive.org/web/20090521200923/http://www.ncma.org/resources/productuse/products/concrete/Pages/Glazed%28Prefaced%29Units.aspx |archive-date=2009-05-21 }}</ref>
 
== Пасивна заштита од пожара (PFP) ==