Шаблон:Convert-lat

Документација шаблона[прикажи] [уреди] [историја] [освежи]

Template {{convert-lat}} calculates measurements from one unit (you can enter) to another one, and then presents the results. For example:

{{convert-lat|2|km|mi}} → 2 km (1,2 mi)

{{convert-lat|7|mi|km}} → 7 mi (11 km)

The available units are listed below. Units are always case-sensitive (kW, not KW or kw). Multiple formatting and calculation options are listed below.

See Help:Convert for more complete information

For currency conversion into US dollars, see Template:To USD

Unit name or symbol (abbreviation): 1 pound or 1 lb?

By default, the first value shows unit name spelled out, the second the symbol (or abbreviation). Use |abbr=on/off to change this behaviour:

• {{convert-lat|1|lb|kg}} → 1 lb (0,45 kg)

To abbreviate both:

• {{convert-lat|1|lb|kg|abbr=on}} → 1 lb (0,45 kg)
• {{convert-lat|1|lb|kg|abbr=off}} → 1 pound (0,45 kilograms)

|abbr=in is the reverse behaviour to the default, |abbr=out:

• {{convert-lat|1|lb|kg|abbr=in}} → 1 lb (0,45 kilograms)

Convenience: {{cvt-lat}} has |abbr=on by default

Template {{cvt-lat}} is similar to {{convert-lat}}, but has |abbr=on as the default behaviour. In {{cvt-lat}}, all other options are available. So:

{{cvt-lat|1|lb|kg}} → Шаблон:Cvt-lat

is equal to:

{{convert-lat|1|lb|kg|abbr=on}} → 1 lb (0,45 kg)

Adjective: a 10-mile distance

Use |adj=on to produce the adjective form:

• A {{convert-lat|10|mi|km|adj=on}} distance → A 10 mi (16 km) distance.

Default behaviour, for comparison:

• {{convert-lat|10|mi|km}} to go → 10 mi (16 km) to go.

This option does not work with |abbr=on.

Rounding: 100 ft is 30 m or 30.5 m or 30.48 m?

By definition, 100 ft equals 30,48 m. In practical use, it is common to round the calculated metric number. With that, there are several possibilities.

Default rounding

By {{convert-lat}} default, the conversion result will be rounded either to precision comparable to that of the input value (the number of digits after the decimal point—or the negative of the number of non-significant zeroes before the point—is increased by one if the conversion is a multiplication by a number between 0.02 and 0.2, remains the same if the factor is between 0.2 and 2, is decreased by 1 if it is between 2 and 20, and so on) or to two significant figures, whichever is more precise. An exception to this is rounding temperatures (see below).

Examples of rounding
Input	Displays as	Note
{{convert-lat|123|ft|m|-1}}	123 ft (40 m)
{{convert-lat|123|ft|m|0}}	123 ft (37 m)
{{convert-lat|123|ft|m|1}}	123 ft (37,5 m)
{{convert-lat|550|ft|m|0}}	550 ft (168 m)	Approximate value is 167.64 m
{{convert-lat|550|ft|m}}	550 ft (170 m)	Rounds to 170, when approximate value is 167.64 m
{{convert-lat|500|ft|m|0}}	500 ft (152 m)	Approximate value is 152.4 m
{{convert-lat|500|ft|m}}	500 ft (150 m)	Rounds to 150, when approximate value is 152.4 m

Convert supports four types of rounding:

Round to a given precision: use a precision number

Specify the desired precision with the fourth unnamed parameter (or third unnamed parameter if the "convert to" parameter is omitted; or fifth unnamed parameter if a range is specified; or fourth unnamed parameter again if a range is specified and the "convert to" parameter is omitted; needs to be replaced with a "precision" named parameter). The conversion is rounded off to the nearest multiple of ¹⁄₁₀ to the power of this number. For instance, if the result is 8621 and the round number is "-2", the result will be 8600. If the result is "234.0283043" and the round number is "0", the result will be 234.

Round to a given number of significant figures: |sigfig=

To specify the output number to be with n significant figures use |sigfig=<number>:

• {{convert-lat|1200|ft|m|sigfig=4}} → 1.200 ft (365,8 m)
• {{convert-lat|1200|ft|m|sigfig=3}} → 1.200 ft (366 m)
• {{convert-lat|1200|ft|m|sigfig=2}} → 1.200 ft (370 m)
• {{convert-lat|1200|ft|m|sigfig=1}} → 1.200 ft (400 m)

Default behaviour, for comparison:

• {{convert-lat|1200|ft|m}} → 1.200 ft (370 m)

Setting |sigfig= is meaningless

• {{convert-lat|1200|ft|m|sigfig=0}} → 1.200 ft (370 m)

Round to a multiple of 5: 15, 20, 25, ...

Using |round=5 rounds the outcome to a multiple of 5.

• {{convert-lat|10|m|ft}} → 10 m (33 ft)
• {{convert-lat|10|m|ft|round=5}} → 10 m (35 ft)

Similar: using |round=25 rounds the outcome to a multiple of 25.

• {{convert-lat|10|m|ft}} → 10 m (33 ft)
• {{convert-lat|10|m|ft|round=25}} → 10 m (25 ft)

Default behaviour, for comparison:

• {{convert-lat|10|m|ft|sigfig=4}} → 10 m (32,81 ft)

In a range, one can round each value individually to the default. Use |round=each:

• {{convert-lat|10 x 200 x 3000|m|ft}} → 10 m × 200 m × 3.000 m (33 ft × 656 ft × 9.843 ft)
• {{convert-lat|10 x 200 x 3000|m|ft|round=each}} → 10 m × 200 m × 3.000 m (33 ft × 660 ft × 9.800 ft)

Round to a multiple of a given fraction: 2 ³⁄₁₆ inch

Specify the desired denominator using |frac=<some positive integer>. (Denominator is the below-the-slash number, for example the 3 in ¹⁄₃).

• {{convert-lat|5.56|cm|in|frac=16}} → 556 cm (218 ⁷⁄₈ in)
• {{convert-lat|8|cm|in|frac=4}} → 8 cm (3 ¹⁄₄ in)

The fraction is reduced when possible:

• {{convert-lat|8|cm|in|frac=100}} → 8 cm (3 ³⁄₂₀ in)

Default behaviour, for comparison:

• {{convert-lat|8|cm|in}} → 8 cm (3,150 in)

In temperatures: rounding °C, °F and K

In temperatures, the conversion will be rounded either to precision comparable to that of the input value or to that which would give three significant figures when expressed in kelvins, whichever is more precise.

1. {{convert-lat|10,000|C|F K}} → 10,000 °C (50,000 °F; 283,150 K)
2. {{convert-lat|10,000.1|C|F K}} → 10,0001 °C (50,0002 °F; 283,1501 K)
3. {{convert-lat|-272|C|F K}} → −272 °C (−457,60 °F; 1,15 K)
4. {{convert-lat|-272|C}} → −272 °C (−457,60 °F)
5. {{convert-lat|-300|C|F K}} → −300 °C (−508,0 °F; −26,9 K)
6. {{convert-lat|0|C|F K}} → 0 °C (32 °F; 273 K)

The precision of the input number in example (1) is one digit, but the precision of its Kelvins expression is three, so the precision of the Fahrenheit conversion is made three (made 180...) . (1) and (2) seem to belie the fact that a 01 degree Celsius change is a 1,8 degrees Fahrenheit change, and make the 32 degrees difference shown in (1) begin to seem off somehow. Result (1) seems off until you set the significant figures yourself with |sigfig=:

{{convert-lat|10000|C|sigfig=5}} → 10.000 °C (18.032 °F)

or you set the precision positionally, relative to the decimal point (zero being at the decimal point):

{{convert-lat|10000|C|0}} → 10.000 °C (18.032 °F)

The precision of the input number in example (2) is six, so the precision of the Fahrenheit output is, whereas before, Kelvins had determined it to be three. Examples (3) and (4) show how this can be hidden and generate questions, but it occurs there because the Kelvins conversion generated two fractional parts. (Before it was the input number that generated the fractional part.) In example (3) the three input digits converted into into five significant output digits because of the two numbers after the decimal point, generated by the Kelvins conversion. This happened again in (5), but in (6) decimal fractions were neither given as input nor induced by the Kelvins conversion.

Into multiple units: 10 °C (50 °F; 283 K)

Separate the multiple output units by a space:

• {{convert-lat|10|C|F K}} → 10 °C (50 °F; 283 K)
• {{convert-lat|5|km|mi nmi}} → 5 km (3,1 mi; 2,7 nmi)

If the output unit names contain spaces, use + as the separator.

See also:

• For multiple-unit options like 1 ft 5 in, see #In input and #In output.

Ranges of values

За a conversion of a difference погледајте страницу § Units of difference.

A range converts two values and separates them by your choice of words and punctuation.

A range: 6 to 17 kg (13 to 37 lb)

Range indicators are entered as the second parameter (between the values). Range separators can be:

Range separators in {{convert}}
Separator	Convert	Result	Notes
-	{{convert|3|-|6|ft}}	3—6 ft (0,91—1,83 m)	Input can be hyphen (-) or en dash (–), output uses en dash
– – (en dash)	{{convert|3|–|6|ft}}	3 –
and	{{convert|3|and|6|ft}}	3 and 6 ft (0,91 and 1,83 m)
and(-)	{{convert|3|and(-)|6|ft}}	3 and 6 ft (0,91—1,83 m)	|abbr=on abbreviates the first unit
and(-)|abbr=on	{{convert|3|and(-)|6|ft|abbr=on}}	3 and 6 ft (0,91—1,83 m)
or	{{convert|3|or|6|ft}}	3 or 6 ft (0,91 or 1,83 m)
to	{{convert|3|to|6|ft}}	3 to 6 ft (0,91 to 1,83 m)
to(-)	{{convert|3|to(-)|6|ft}}	3 to 6 ft (0,91—1,83 m)	|abbr=on abbreviates the first unit
to(-)|abbr=on	{{convert|3|to(-)|6|ft|abbr=on}}	3 to 6 ft (0,91—1,83 m)
to about	{{convert|3|to about|6|ft}}	3 to about 6 ft (0,91 to about 1,83 m)
+/-	{{convert|3|+/-|6|ft}}	3 ± 6 ft (0,91 ± 1,83 m)
± ±	{{convert|3|±|6|ft}}	3 ± 6 ft (0,91 ± 1,83 m)
+	{{convert|3|+|6|ft}}	3 + 6 ft (0,91 + 1,83 m)
,	{{convert|3|,|6|ft}}	3, 6 ft (0,91, 1,83 m)
, and	{{convert|3|, and|6|ft}}	3, and 6 ft (0,91, and 1,83 m)
, or	{{convert|3|, or|6|ft}}	3, or 6 ft (0,91, or 1,83 m)
by	{{convert|3|by|6|ft}}	3 by 6 ft (0,91 by 1,83 m)
x	{{convert|3|x|6|ft}}	3 ft × 6 ft (0,91 m × 1,83 m)	|abbr=on abbreviates and repeats the first unit
× ×	{{convert|3|×|6|ft}}	3 ft × 6 ft (0,91 m × 1,83 m)
x|abbr=on	{{convert|3|x|6|ft|abbr=on}}	3 ft × 6 ft (0,91 m × 1,83 m)
xx	|xx| is deprecated. Use |x| instead
*	|*| is deprecated. Use |x| instead

Multiple dimensions: 6 m × 12 m (20 ft × 39 ft)

Use by:

• {{convert-lat|6|by|12|ft|m}} → 6 by 12 ft (1,8 by 3,7 m)

Use ×, multiplication sign, or x, letter:

• {{convert-lat|6|x|12|m|ft}} → 6 m × 12 m (20 ft × 39 ft)

In science, the formal way is to set |x| and |abbr=on (keeping dimensions right, like in area = x km²):

• {{convert-lat|6|x|12|m|ft|abbr=on}} → 6 m × 12 m (20 ft × 39 ft)

About feet, inch in ranges and multiples

While it is possible to enter feet, inch in a simple conversion, this is not possible for ranges:

• {{convert-lat|1|ft|3|in|x|3|ft|5|in|mm}} → 1 ft 3 in ()

Default behaviour, for comparison:

• {{convert-lat|1|ft|3|in|mm}} → 1 ft 3 in (380 mm)

Words

Spelling of unit name: UK metre or US meter?

Default spelling of units is en-UK. To show en-US spelling, use |sp=us:

{{convert-lat|1|m|ft}} → 1 m (3,3 ft)—default

{{convert-lat|1|m|ft|sp=us}} → 1 m (3,3 ft)

Spell out numbers: ten miles

To write a number in words, use |spell=in:

• {{convert-lat|10|mi|m|spell=in}} → ten mi (16.000 m)

To spell out both in and out values, use |spell=on:

• {{convert-lat|10|mi|m|spell=on}} → ten miles (sixteen thousand metres)

To make first letter a capital, use |spell=In, |spell=On

• {{convert-lat|10|mi|m|spell=In}} → Ten mi (16.000 m)
• {{convert-lat|10|mi|m|spell=On}} → Ten miles (sixteen thousand metres)

Remember that the spelling of the units (ft, m) is independently set by |abbr=. To the extreme:

• {{convert-lat|10|mi|m|spell=on|abbr=off|sp=us}} → ten miles (sixteen thousand meters)

Inserted before units: 4 planted acres

• {{convert-lat|4|acre||adj=pre|planted}} → 4 planted acres (1,6 ha)

disp=preunit is similar, but has no separator after the specified text, and can have different text for the output value:

• {{convert-lat|4|acre||disp=preunit|planted }} → 4 planted acres (1,6 planted ha)
• {{convert-lat|4|acre||disp=preunit|planted |reforested-}} → 4 planted acres (1,6 reforested-ha)

After adjective unit: A 10 ft-long corridor

{{convert-lat|10|ft|m|adj=mid|-long}} → 10 ft-long (3,0 m)

Plurals: 1 inch, 2 inches

The unit symbol is singular always. Depending on the preceding number only, a unit name can be shown plural.

• {{convert-lat|1|metre}} → 1 m (3 ft 3 in)
• {{convert-lat|2|metre}} → 2 m (6 ft 7 in)
• {{convert-lat|2|metre|abbr=on}} → 2 m (6 ft 7 in)

Exception

Entering the unit spelled |foot| forces singular output "foot", whatever the number is.

• {{convert-lat|100|foot|abbr=off}} → 100 foot (30 metres)

Fractions: one-eighth of an imperial pint

The convert template also supports spelling out fractions.

• {{convert-lat|1/4|oz|g|spell=in}} → one-quarter oz (7,1 g)

Any additional words needed for the fraction can also be added at the end of the template.

• {{convert-lat|1/8|imppt|mL|spell=in|adj=pre|of an}} → one-eighth of an imp pt (71 mL)

Numbers

Using an SI prefix: gigameter (Gm), or micrometer (μm)

Metric prefixes
Text Symbol Factor yotta Y 1024 zetta Z 1021 exa E 1018 peta P 1015 tera T 1012 giga G 109 mega M 106 kilo k 103 hecto h 102 deca da 101 (none) (none)  1 deci d 10−1 centi c 10−2 milli m 10−3 micro μ 10−6 nano n 10−9 pico p 10−12 femto f 10−15 atto a 10−18 zepto z 10−21 yocto y 10−24

Units can have an SI prefix like G before the unit: Gm, and giga before the name: gigameter. These are plain multiplication factors.

To illustrate, these are trivial calculations (from meter to meter), showing the multiplication factor:

• 12 Gm (1,2×10¹⁰ m)
• 12 µm (1,2×10⁻⁵ m)

The prefix can be added before the SI unit (here: unit m for meter):

• {{convert-lat|12|Gm|mi|abbr=on}} → 12 Gm (7.500.000 mi)
• Mm: 12 Mm (7.500 mi)
• km: 12 km (39.000 ft)
• mm: 12 mm (0,47 in)
• μm: 12 µm (0,012 mm)
• um: 12 µm (0,012 mm) (letter "u" can be used for "μ" here)

The prefix can be used in the output unit:

• {{convert-lat|12000|mi|Mm|abbr=on}} → 12.000 mi (19 Mm)
• {{convert-lat|12|in|μm|abbr=on}} → 12 in (300.000 µm)

As an exception, the non-SI unit "inch" can have the "μ" prefix too)

• {{convert-lat|12|μm|μin|abbr=on}} → 12 µm (470 μin)

Za više informacija pogledajte: Help:Convert units § SI prefixes

Engineering notation: 7 × 10⁶ m

In the unit: e6m

Engineering number notations like 7E6 (for 7 × 10⁶) can be entered as a "prefix" to the unit:

• {{convert-lat|7|e6m}} → 7×10^⁶ m (23.000.000 ft)

The same is possible for the output unit:

• {{convert-lat|23,000,000|ft|e6m}} →

Any standard unit (not a combination, multiple, or built-in unit) can have such a prefix:

• e3 (thousand),
• e6 (million),
• e9 (billion),
• e12 (trillion),
• e15 (quadrillion).

Scientific notation: 1.23×10⁻¹⁴

In scientific notation, a number is written like 1,23×10⁻¹⁴. The plain number has exactly one digit before the decimal point.

With {{convert-lat}}, the input can be in e-notation such as 12.3e4. This value is displayed as a power of ten, and the output is displayed in scientific notation, except that an output value satisfying 0.01 <= v < 1000 is shown as a normal number. In addition, if the output value is 1000 and sigfig=4 is used, the value is displayed as a normal number.

• {{convert-lat|12.3e-15|atm|atm|abbr=on}} → 123×10⁻¹⁵ atm (1,23×10⁻¹³ atm)
• {{convert-lat|0.00000005|atm|atm|abbr=on}} → 000.000.005 atm (5,0 atm)

Input with fractions: 1 ¹⁄₂ in (38,1 mm)

The number to convert can be written in fractions. Both / (keyboard slash) and ⁄ (fraction slash) are accepted:

• {{convert-lat|1/2|in|mm|1}} → ¹⁄₂ in (12,7 mm)
• {{convert-lat|1⁄2|in|mm|1}} → ¹⁄₂ in (12,7 mm)

With integers, use a + sign

• {{convert-lat|2+1⁄2|in|mm|1}} → 2 ¹⁄₂ in (63,5 mm)

When negative, use a hyphen - and repeat it:

• {{convert-lat|-2-1⁄2|in|mm|1}} → −2 ¹⁄₂ in (−63,5 mm)
• {{convert-lat|2-1⁄2|in|mm|1}} → 2—¹⁄₂ in (50,8—12,7 mm) Note: this is read as a range
• {{convert-lat|-2+1⁄2|in|mm|1}} → N Should be a number, not an expression (do not require a calculation)

Output with horizontal fraction bar in: 1/2 inch

Using a double slash (//) returns a horizontal bar fraction:

• {{convert-lat|1//2|in|mm|1}} → 1/2 in (12,7 mm)
• {{convert-lat|2+1//2|in|mm|1}} → 2 1/2 in (63,5 mm)

Thousands separator: 1,000 mi or 1000 mi

In input, a comma for thousands separator is accepted but not required; a gap (space) is not accepted. In output, by default, the thousand separator is the comma:

• {{convert-lat|1234567|m|ft}} → 1.234.567 m (4.050.417 ft)
• {{convert-lat|1,234,567|m|ft}} →
• {{convert-lat|1 234 567|m|ft}} → N

Set |comma=off to remove the separator from the output:

• {{convert-lat|1234567|m|ft|comma=off}} → 1234567 m (4050417 ft)

Use |comma=gaps to use digit grouping by gap (thin space) as a thousands separator:

• {{convert-lat|1234567|m|ft|comma=gaps}} → 1234567 m (4050417 ft)

Default behaviour, for comparison:

• {{convert-lat|1234567|m|ft}} → 1.234.567 m (4.050.417 ft)

Setting |comma=5 or |comma=gaps5 will only add the separator when the number of digits is 5 or more:

• {{convert-lat|1234|m|ft|comma=5}} → 1234 m (4049 ft)
• {{convert-lat|1234567|m|ft|comma=5}} → 1.234.567 m (4.050.417 ft)
• {{convert-lat|1234|m|ft|comma=gaps5}} → 1234 m (4049 ft)
• {{convert-lat|1234567|m|ft|comma=gaps5}} → 1234567 m (4050417 ft)

Default behaviour, for comparison:

• {{convert-lat|1234|m|ft}} → 1.234 m (4.049 ft)

Output manipulation

Brackets and separators: 10 m [33 ft]

Punctuation that distinguishes the two measurements is set by |disp=.
Options are: b (the default), sqbr, comma, or, br, x|…:

• {{convert-lat|10|m|ft|disp=sqbr}} → 10 m [33 ft]
• {{convert-lat|10|m|ft|disp=comma}} → 10 m, 33 ft
• {{convert-lat|10|m|ft|disp=or}} → 10 m or 33 ft

Default behaviour, for comparison:

• {{convert-lat|10|m|ft}} → 10 m (33 ft)

Setting |disp=br will force a new line (<br/>)

• {{convert-lat|10|m|ft|disp=br}} → 10 m
  33 ft

Also |disp=br() will force a new line, and keep the brackets:

• {{convert-lat|10|m|ft|disp=br()}} → 10 m
  (33 ft)

Setting |disp=x|… allows any text as separator:

• {{convert-lat|10|m|ft|disp=x|_MyText_}} → 10 m_MyText_33 ft—(To display spaces, use  )

Flipping (reordering) the two measurements: 1.609,3 metres (1 mile)

Setting |order=flip will flip (swap) the two measurements:

• {{convert-lat|1|mi|m|order=flip}} → 1.609,3 metres (1 mile)

Default behaviour, for comparison:

• {{convert-lat|1|mi|m}} → 1 mile (1.609,3 metres)

When converting to multiple units, the effect is:

• {{convert-lat|10|km|mi nmi|order=flip}} → 6,2137 miles; 5,3996 nautical miles (10 kilometres)
• {{convert-lat|10|km|nmi mi|order=flip}} → 5,3996 nautical miles; 6,2137 miles (10 kilometres)

Displaying parts of the result: 2 (1,5)

It is possible to display only parts of the conversion result:

Convert	Output	Description
{{convert-lat|2|cuyd|m3}}	2 cu yd (1,5 m3)	Default behaviour, for comparison
{{convert-lat|2|cuyd|m3|abbr=values}}	2 (1,5)	Input and output numbers
{{convert-lat|2|cuyd|m3|disp=unit}}	cu yd	Input unit
{{convert-lat|2|cuyd|m3|disp=unit|adj=on}}	cu yd	Input unit, adjective (hyphenated)
{{convert-lat|2|cuyd|cuyd|0|disp=out|abbr=off}}	2 cubic yards	Input (workaround)
{{convert-lat|2|cuyd|m3|abbr=~}}	2 cu yd [cu yd] (1,5 m3)	Input: both name and symbol
{{convert-lat|2|cuyd|m3|disp=unit2}}	m3	Output unit (symbol)
{{convert-lat|2|cuyd|m3|disp=unit2|abbr=off}}	cubic metres	Output unit (name)
{{convert-lat|2|cuyd|m3|disp=number}}	1,5	Output value
{{convert-lat|2|cuyd|m3|disp=out}}	1,5 m3	Output value and unit
{{convert-lat|2|cuyd|m3|disp=out|abbr=off}}	1,5 cubic metres	Output value and unit

Display both input name and symbol: 2 kilopascals [kPa]

Setting |abbr=~ returns both name and symbol of the first (input) unit:

• {{convert-lat|2|kPa|psi|abbr=~}} → 2 kPa [kPa] (0,29 psi)
• A {{convert-lat|2|kPa|psi|abbr=~|adj=on}} pressure → A 2 kPa [kPa] (0,29 psi) pressure

Table options

For the wikitable structure, there are three options: add a line-break, split the result over columns and make the table sortable.

Enforced line break

|disp=br adds a line-break and omits brackets.

|disp=br() adds a line-break and does add brackets to the converted value. This may be useful in tables:

|disp=br	|disp=br()

Table columns showing numbers only

Using {convert} in a table cell, with |disp=table splits the result over two columns:

{{convert-lat|10|m|ft|disp=table}} →

10

|style="text-align:right;"|33

|disp=tablecen does the same, and also centers the text:

{{convert-lat|20|m|ft|disp=tablecen}} →

20

|style="text-align:center;"|66

The units are added as a column header:

	m	ft
|disp=table	10	33
|disp=tablecen	20	66
|disp=<other> (default)

Sorting

Use |sortable=on to include a hidden numerical sortkey in the output, suitable for use in a table with sortable columns. Technically, this places a hidden string before the actual displayed values:

{{convert-lat|10|m|ft|sortable=on}} → <span style="display:none">7001100000000000000</span>10 metres (33&nbsp;ft)

Use both |disp=table and |sortable=on together to produce table columns (pipe symbols) for each value in sortable columns:

	m	ft
A	15 3⁄4	52
B	155	509
C	160	520
D	16	52

The generated sortkey is calculated in a consistent way based on both the value and its unit as passed to the convert template. In most cases convert uses the passed value converted to SI base units. It is therefore not necessarily the displayed value or other alternate units and is calculated regardless of output format options. Using different units or different order of units in individual rows should therefore not lead to incorrect sorting, although variations in rounding can give surprising results, since an unrounded number is used for the sortkey.

Units

All units

Units are case-sensitive: use kW, not KW or kw

The table below lists units supported by {{convert}}. More complete lists are linked for each dimension. For a complete list of all dimensions, see full list of units.

{{Convert}} uses unit-codes, which are similar to, but not necessarily exactly the same as, the usual written abbreviation for a given unit. These unit-codes are displayed in column 3 of the following tables. These are accepted as input by {{convert}} as the second and third unnamed parameters:

• {{convert|100|kg|lb}} → 100 kg (220 lb)
• {{convert|100|lb|kg}} → 100 lb (45 kg)

The unit-codes should be treated as case-sensitive:

• {{convert|100|Mm|mm}} → 100 Mm (1,0×10¹¹ mm)

The output of {{convert}} can display multiple converted units, if further unit-codes are specified after the second unnamed parameter (without the pipe separator). Typical combination output units are listed below in column 7.

• {{convert|55|nmi|km mi}} → 55 nmi (102 km; 63 mi)
• {{convert|1|oz|ozt g gr}} → 1 oz (0,91 ozt; 28 g; 440 gr)

Some units have alternative unit-codes. These are shown in brackets in column 3, e.g. °F (F). Either may be entered for Fahrenheit (but not a lower-case f).

Abridged list of supported units
Explanation
system	unit	unit- code	symbol or abbrev.	notes	sample default conversion	combination output units
the system(s) to which the unit belongs	units listed by name	unit-code to use in template	symbols shown in output	other notes about the units	sample of the default conversion for the unit	output codes for multiple conversions
AREA (Full list)
system	unit	unit- code	abbrev- iation	notes	sample default conversion	combination output units
SI	km2	km2	km2	US spelling: square kilometer	10 km2 (3,9 sq mi)	km2 sqmi
	m2	m2	m2	US spelling: square meter	10 m2 (110 sq ft)	m2 sqft
	cm2	cm2	cm2	US spelling: square centimeter	10 cm2 (1,6 sq in)	cm2 sqin
	mm2	mm2	mm2	US spelling: square millimeter	10 mm2 (0,016 sq in)	mm2 sqin
non-SI metric	ha	ha	ha		10 ha (25 acres)
Imperial & US customary	sq mi	sqmi	sq mi		10 sq mi (26 km2)	sqmi km2
	acre	acre	(none)		10 acres (4,0 ha)
	sq yd	sqyd	sq yd		10 sq yd (8,4 m2)
	sq ft	sqft (sqfoot)	sq ft	long code "sqfoot" outputs square foot (and never feet)	10 sq ft (0,93 m2)	sqft m2 (sqfoot m2)
	sq in	sqin	sq in		10 sq in (65 cm2)	sqin cm2
Other	sq nmi	sqnmi	sq nmi		10 sq nmi (34 km2; 13 sq mi)
	dunam	dunam	(none)	For alternative spellings and definitions see the full list	10 dunams (0,010 km2; 0,0039 sq mi)
	tsubo	tsubo	(none)		10 tsubo (33 m2)
DENSITY (Full list)
system	unit	unit- code	abbrev- iation	notes	sample default conversion	combination output units
Metric	kg/m3	kg/m3	kg/m3		10 kg/m3 (17 lb/cu yd)	kg/m3 lb/ft3 (kg/m3 lb/cuft) kg/m3 lb/yd3 (kg/m3 lb/cuyd)
	g/m3	g/m3	g/m3		10 g/m3 (0,017 lb/cu yd)	g/m3 kg/m3 g/m3 lb/ft3 (g/cm3 lb/cuft) g/m3 lb/yd3 (g/cm3 lb/cuyd)
Imperial & US customary	lb/cu ft	lb/ft3	lb/cu ft		10 lb/cu ft (0,16 g/cm3)	lb/ft3 kg/m3 (lb/cu ft g/m3) lb/ft3 g/m3 (lb/cu ft g/m3)
	lb/cu yd	lb/yd3	lb/cu yd		10 lb/cu yd (5,9 kg/m3)	lb/yd3 kg/m3 (lb/cuyd kg/m3) lb/yd3 g/m3 (lb/cuyd g/m3)
ENERGY (Full list)
system	unit	unit- code	abbrev- iation	notes	sample default conversion	combination output units
SI	GJ	GJ	GJ		10 GJ (2.800 kWh)
	MJ	MJ	MJ		10 MJ (2,8 kWh)
	kJ	kJ	kJ		10 kJ (2.400 cal)
	hJ	hJ	hJ		10 hJ (240 cal)
	daJ	daJ	daJ		10 daJ (24 cal)
	J	J	J		10 J (2,4 cal)
	dJ	dJ	dJ		10 dJ (0,24 cal)
	cJ	cJ	cJ		10 cJ (0,024 cal)
	mJ	mJ	mJ		10 mJ (0,0024 cal)
	µJ	µJ (uJ)	µJ		10 µJ (2,4×10−6 cal)
	nJ	nJ	nJ		10 nJ (2,4×10−9 cal)
cgs	Merg	Merg	Merg		10 Merg (1,0 J)
	kerg	kerg	kerg		10 kerg (1,0 mJ)
	erg	erg	(none)		10 erg (1,0 µJ)
Watt-hour multiples	TWh	TWh	TWh		10 TWh (36 PJ)
		TW.h	TW⋅h
	GWh	GWh	GWh		10 GWh (36 TJ)
		GW.h	GW⋅h
	MWh	MWh	MWh		10 MWh (36 GJ)
		MW.h	MW⋅h
	kWh	kWh	kWh		10 kWh (36 MJ)
		kW.h	kW⋅h
	Wh	Wh	Wh		10 Wh (36 kJ)
		W.h	W⋅h
Electron- volt multiples
	GeV	GeV	GeV		10 GeV (1,6 nJ)
	MeV	MeV	MeV		10 MeV (1,6 pJ)
	keV	keV	keV		10 keV (1,6 fJ)
	eV	eV	eV		10 eV (1,6 aJ)
	meV	meV	meV		10 meV (1,6 zJ)
Calorie multiples	Cal	Cal	Cal	The thermo-chemical calorie is the default definition. For others, see the full list.	10 Cal (42 kJ)
	Mcal	Mcal	Mcal		10 Mcal (42 MJ)
	kcal	kcal	kcal		10 kcal (42 kJ)
	cal	cal	cal		10 cal (42 J)
	mcal	mcal	mcal		10 mcal (42 mJ)
pound/ ounce-foot/ inch-hour-minute-second	ft⋅pdl	ftpdl	ft⋅pdl		10 ft⋅pdl (0,42 J)
	ft⋅lbf	ftlbf	ft⋅lbf		10 ft⋅lbf (14 J)
		ftlb-f	ft⋅lbf
	in⋅lbf	inlbf	in⋅lbf		10 in⋅lbf (1.100 mJ)
		inlb-f	in⋅lbf
	in⋅ozf	inozf	in⋅ozf		10 in⋅ozf (71 mJ)
		inoz-f	in⋅ozf
	hp⋅h	hph	hp⋅h		10 hp⋅h (7,5 kWh)
British thermal unit	Btu	Btu	Btu	The International Steam Table British thermal unit is used. For others, see the full list.	10 Btu (11 kJ)
		BTU	BTU
TNT-based units	gigatonne of TNT	GtTNT	(none)		10 gigatonnes of TNT (42 EJ)
	gigaton of TNT	GtonTNT	(none)
	megatonne of TNT	MtTNT	(none)		10 megatonnes of TNT (42 PJ)
	Mt	MtonTNT	Mt
	kilotonne of TNT	ktTNT	(none)		10 kilotonnes of TNT (42 TJ)
	kt	ktonTNT	kt
	tonne of TNT	tTNT	(none)		10 tonnes of TNT (42 GJ)
	ton of TNT	tonTNT	(none)
Other
	Eh	Eh	Eh		10 Eh (270 eV)
	Ry	Ry	Ry		10 Ry (140 eV)
	toe	toe	toe		10 toe (420 GJ)
	BOE	BOE	BOE		10 BOE (61 GJ)
	cubic foot of natural gas	cuftnaturalgas (cufootnaturalgas)		Unit-code cufootnaturalgas will show "cubic foot of natural gas" if plural.	10 cubic feet of natural gas (11 MJ)
	l⋅atm	latm	l⋅atm		10 l⋅atm (1.000 J)
		Latm	L⋅atm
	imp gal⋅atm	impgalatm	imp gal⋅atm		10 imp gal⋅atm (4.600 J)
	US gal⋅atm	USgalatm (usgalatm)	US gal⋅atm		10 US gal⋅atm (3.800 J)
		U.S.galatm (usgalatm)	U.S. gal⋅atm
FORCE (Full list)
system	unit	unit- code	abbrev- iation	notes	sample default conversion	combination output units
SI	GN	GN	GN	Allows triple output units. See: full list.	10 GN (2,2×109 lbf)	GN LT-f GN LTf GN ST-f GN STf
	MN	MN	MN	Allows triple output units. See: full list.	10 MN (2.200.000 lbf)	MN LT-f MN LTf MN ST-f MN STf
	kN	kN	kN	Allows triple output units. See: full list.	10 kN (2.200 lbf)	kN LT-f kN LTf kN ST-f kN STf
	N	N	N		10 N (2,2 lbf)	N lb-f N lbf N oz-f N ozf
	mN	mN	mN		10 mN (0,036 ozf)	mN oz-f mN ozf mN gr-f mN grf
	µN	µN (uN)	µN		10 µN (2,2×10−6 lbf)	µN gr-f µN grf
	nN	nN	nN		10 nN (1,6×10−5 grf)	nN gr-f nN grf
cgs	Mdyn	Mdyn	Mdyn		10 Mdyn (22 lbf)
	kdyn	kdyn	kdyn		10 kdyn (0,36 ozf)
	dyn	dyn (dyne)	dyn		10 dyn (0,16 grf)
	mdyn	mdyn	mdyn		10 mdyn (0,00016 grf)
Metric gravitational units	tf	t-f	tf		10 tf (98 kN; 9,8 LTf; 11 STf)
		tf	tf
	kgf	kg-f	kgf		10 kgf (98 N; 22 lbf)
		kgf	kgf
	gf	g-f	gf		10 gf (98 mN; 0,35 ozf)
		gf	gf
	mgf	mg-f	mgf		10 mgf (98 µN; 0,15 grf)
		mgf	mgf
Avoirdupois-based units	pdl	pdl	pdl		10 pdl (1,4 N)
	LTf	LT-f	LTf		10 LTf (100 kN)	LT-f ST-f
		LTf	long ton-force			LTf STf
	STf	ST-f	STf		10 STf (89 kN)	ST-f LT-f
		STf	short ton-force			STf LTf
	lbf	lb-f	lbf		10 lbf (44 N)
		lbf	lbf
	grf	gr-f	grf		10 grf (6.400 µN)
		grf	grf
LENGTH (Full list)
system	unit	unit- code	abbrev- iation	notes	sample default conversion	combination output units
SI	Mm	Mm	Mm	US spelling: megameter	10 Mm (6.200 mi)
	km	km	km	US spelling: kilometer	10 km (6,2 mi)	km mi
	m	m	m	US spelling: meter	10 m (33 ft)	m ft m ftin
	cm	cm	cm	US spelling: centimeter	10 cm (3,9 in)	cm in
	mm	mm	mm	US spelling: millimeter	10 mm (0,39 in)	mm in
	µm	µm (um)	µm	US spelling: micrometer	10 µm (3,3×10−5 ft)
	nm	nm	nm	US spelling: nanometer	10 nm (3,9×10−7 in)
non-SI metric	Å	Å (angstrom)	Å		10 Å (3,9×10−8 in)
Imperial & US customary	mi	mi	mi		10 mi (16 km)	mi km
	furlong	furlong	(none)		10 furlongs (6.600 ft; 2.000 m)
	chain	chain	(none)		10 chains (660 ft; 200 m)
	rd	rd	rd	For other names of this unit see the full list.	10 rd (160 ft; 50 m)
	fathom	fathom	(none)	fathom ≡ 6 ft	10 fathoms (60 ft; 18 m)
	yd	yd	yd	assumes the international definition	10 yd (9,1 m)
	ft	ft (foot)	ft	long code "foot" outputs foot (and never feet)	10 ft (3,0 m)	ftin (feet and inches) ft m (foot m)
	in	in	in		10 in (250 mm)	in cm in mm
Other	nmi	nmi	nmi	the international standard nautical mile For other nautical miles see the full list.	10 nmi (19 km; 12 mi)
	pc	pc	pc		10 pc (33 ly)
	ly	ly	ly		10 ly (630.000 AU)
	AU	AU	AU		10 AU (1,5×109 km; 930.000.000 mi)
MASS (Full list)
system	unit	unit- code	abbrev- iation	notes	sample default conversion	combination output units
SI	kg	kg	kg	Allows triple output units. See: full list.	10 kg (22 lb)	kg lb kg st
	g	g	g		10 g (0,35 oz)	g oz
	mg	mg	mg		10 mg (0,15 gr)	mg gr
	µg	µg (ug)	µg		10 µg (3,5×10−7 oz)
non-SI metric	t	t	t	Allows triple output units. See: full list.	10 t (9,8 long tons; 11 short tons)	t LT t ST
	t	MT	t			MT LT MT ST
Avoirdupois	long ton	LT	(none)	2,240 lb used mostly in the British Commonwealth. Allows triple output units. See: full list.	10 long tons (10 t)	LT t LT MT LT ST
		long ton	long ton
	short ton	ST	(none)	2,000 lb used mostly in the US. Allows triple output units. See: full list.	10 short tons (9,1 t)	ST t ST MT ST LT
		short ton	short ton
	st	st	st	14 lb used mostly in the British Commonwealth except Canada. Allows triple output units. See: full list.	10 st (140 lb; 64 kg)	st kg st lb
	lb	lb	lb	Allows triple output units. See: full list.	10 lb (4,5 kg)	lb kg lb st
	oz	oz	oz		10 oz (280 g)	oz g
	drachm	drachm	(none)		10 drachms (18 g)
	drachm	dram	(none)
	gr	gr	gr	equivalent to the troy grain	10 gr (0,65 g)
Troy	ozt	ozt	ozt		10 ozt (11 oz; 310 g)
other	carat	carat	(none)		10 carats (2,0 g)
SPEED (Full list)
system	unit	unit- code	abbrev- iation	notes	sample default conversion	combination output units
SI	m/s	m/s	m/s	US spelling: meter per second	10 m/s (33 ft/s)	m/s ft/s (m/s foot/s)
non-SI metric	km/h	km/h	km/h	US spelling: kilometer per hour	10 km/h (6,2 mph)	km/h mph
Imperial & US customary	mph	mph	mph		10 mph (16 km/h)	mph km/h mph kn
	ft/s	ft/s (foot/s)	ft/s	long code "foot/s" outputs foot per second (and never feet)	10 ft/s (3,0 m/s)	ft/s m/s
Maritime units	kn	kn (knot)	kn		10 kn (19 km/h; 12 mph)	kn mph
TEMPERATURE (Full list)
system	unit	unit- code	abbrev- iation	notes	sample default conversion	combination output units
SI	K	K	K	Allows triple output units. See: full list.	10 K (−263,1 °C; −441,7 °F)	K °C (K C) K °R (K R) K °F (K F)
	°C	°C (C)	°C		10 °C (50 °F)	°C K (C K) °C °R (C R) °C °F (C F)
Imperial & US customary	°R	°R (R)	°R		10 °R (5,56 K; −449,67 °F; −267,59 °C)	°R K (R K) °R °C (R C) °R °F (R F)
	°F	°F (F)	°F		10 °F (−12 °C)	°F K (F K) °F °C (F C) °F °R (F R)
	Celsius change	C-change		Used for temperature intervals instead of actual temperatures Example:  {{convert|5|C-change|0}} warmer Result: 5 °C (9 °F) warmer
	Fahrenheit change	F-change		Used for temperature intervals instead of actual temperatures Example:  {{convert|10|F-change|0}} colder Result: 10 °F (6 °C) colder
TORQUE (Full list)
system	unit	unit- code	abbrev- iation	notes	sample default conversion	combination output units
Industrial
SI	N⋅m	Nm	N⋅m	Triple combinations are also possible. See the full list.	10 N⋅m (7,4 lbf⋅ft)	Nm kg.m Nm lb.ft
Non-SI metric	kg⋅m	kg.m	kg⋅m		10 kg⋅m (98 N⋅m; 72 lb⋅ft)	kg.m Nm kg.m lb.ft
Imperial & US customary	lb⋅ft	lb.ft	lb⋅ft		10 lb⋅ft (14 N⋅m)	lb.ft Nm lb.ft kg-m
Scientific
SI	N⋅m	N.m	N⋅m	Triple combinations are also possible. See the full list.	10 N⋅m (7,4 lbf⋅ft)	N.m kgf.m N.m lbf.ft
Non-SI metric	kgf⋅m	kgf.m	kgf⋅m		10 kgf⋅m (98 N⋅m; 72 lbf⋅ft)	kgf.m N.m kgf.m lbf.ft
Imperial & US customary	lbf⋅ft	lbf.ft	lbf⋅ft		10 lbf⋅ft (14 N⋅m)	lbf.ft N.m lbf.ft kgf.m
VOLUME (Full list)
system	unit	unit- code	abbrev- iation	notes	sample default conversion	combination output units
SI	m3	m3	m3	US spelling: cubic meter one kilolitre	10 m3 (350 cu ft)
	cm3	cm3	cm3	US spelling: cubic centimeter one millilitre	10 cm3 (0,61 cu in)
		cc	cc
	mm3	mm3	mm3	US spelling: cubic millimeter	10 mm3 (0,00061 cu in)
non-SI metric	kl	kl	kl	US spelling: kiloliter one cubic metre	10 kl (350 cu ft)
		kL	kL
	l	l	l	US spelling: liter one cubic decimetre Allows triple output units. See: full list.	10 l (2,2 imp gal; 2,6 US gal)	l impgal l USgal l U.S.gal l USdrygal l U.S.drygal
		L	L			L impgal L impqt L USgal L U.S.gal L USdrygal L U.S.drygal
	cl	cl	cl	US spelling: centiliter	10 cl (3,5 imp fl oz; 3,4 US fl oz)
		cL	cL
	ml	ml	ml	US spelling: milliliter one cubic centimetre	10 ml (0,35 imp fl oz; 0,34 US fl oz)	ml impoz ml USoz ml U.S.oz
		mL	mL			mL impoz mL USoz mL U.S.oz
Imperial & US customary	cu yd	cuyd	cu yd		10 cu yd (7,6 m3)
	cu ft	cuft (cufoot)	cu ft	long code "cufoot" outputs cubic foot (and never feet)	10 cu ft (0,28 m3)
	cu in	cuin	cu in		10 cu in (160 cm3)
Imperial	imp bbl	impbbl	imp bbl	36 imp gal	10 imp bbl (1.600 l; 360 imp gal; 430 US gal)
	imp bsh	impbsh	imp bsh	8 imp gal	10 imp bsh (360 l; 80 imp gal; 83 US dry gal)
		impbu	imp bu
	imp gal	impgal	imp gal	4.54609 litres by definition, also 4 imp qt or 8 imp pt or 160 imp fl oz Allows triple output units. See: full list.	10 imp gal (45 l; 12 US gal)	impgal l impgal L impgal USgal impgal U.S.gal impgal USdrygal impgal U.S.drygal
	imp qt	impqt	imp qt	1/4 imp gal or 40 imp fl oz	10 imp qt (11.000 ml; 380 US fl oz)
	imp pt	imppt	imp pt	1/8 imp gal or 20 imp fl oz	10 imp pt (5,7 l)
	imp fl oz	impoz (impfloz)	imp fl oz	1/160 imp gal	10 imp fl oz (280 ml; 9,6 US fl oz)	impoz USoz impoz U.S.oz impoz ml impoz mL
US customary liquid measure	US bbl	USbbl	US bbl	31½ US gal used for liquids except for oil and beer (see the full list)	10 US bbl (1.200 l; 310 US gal; 260 imp gal)
		U.S.bbl	U.S. bbl
	bbl	oilbbl	bbl	42 US gal	10 bbl (1,6 m3)
	US bbl	USbeerbbl (usbeerbbl)	US bbl		10 US bbl (1.200 l; 310 US gal; 260 imp gal)
		U.S.beerbbl (usbeerbbl)	U.S. bbl
	US gal	USgal	US gal	231 cubic inches by definition, also 4 US qt or 8 US pt or 128 US fl oz Allows triple output units. See: full list.	10 US gal (38 l; 8,3 imp gal)	USgal l USgal L USgal impgal
		U.S.gal	U.S. gal			USgal l USgal L USgal impgal
	US qt	USqt	US qt	1/4 US gal or 32 US fl oz	10 US qt (9.500 ml)
		U.S.qt	U.S. qt
	US pt	USpt	US pt	1/8 US gal or 16 US fl oz	10 US pt (4,7 l; 8,3 imp pt)
		U.S.pt	U.S. pt
	US fl oz	USoz (USfloz)	US fl oz	1/128 US gal	10 US fl oz (300 ml)	USoz ml USoz mL USoz impoz
		U.S.oz (U.S.floz)	U.S. fl oz			U.S.oz ml U.S.oz mL U.S.oz impoz
US customary dry measure	US dry bbl	USdrybbl	US dry bbl	105/32 US bsh	10 US dry bbl (1,2 m3)
		U.S.drybbl	U.S. dry bbl
	US bsh	USbsh	US bsh	2150.42 cubic inches by definition	10 US bsh (350 l; 80 US dry gal; 78 imp gal)
		U.S.bsh	U.S. bsh
	US bu	USbu	US bu	2150.42 cubic inches by definition	10 US bu (350 l; 80 US dry gal; 78 imp gal)
		U.S.bu	U.S. bu
	US dry gal	USdrygal	US dry gal	1/8 US bsh Allows triple output units. See: full list.	10 US dry gal (44 l)	USdrygal l USdrygal L USdrygal impgal
		U.S.drygal	U.S. dry gal			U.S.drygal l U.S.drygal L U.S.drygal impgal
	US dry qt	USdryqt	US dry qt	1/32 US bsh	10 US dry qt (11.000 ml)
		U.S.dryqt	U.S. dry qt
	US dry pt	USdrypt	US dry pt	1/32 US bsh	10 US dry pt (5.500 ml)
		U.S.drypt	U.S. dry pt
PRESSURE
	unit	unit- code	abbrev- iation		sample default conversion
	GPa	GPa	GPa		10 GPa (1.500.000 psi)
	MPa	MPa	MPa		10 MPa (1.500 psi)
	kPa	kPa	kPa		10 kPa (1,5 psi)
	hPa	hPa	hPa		10 hPa (0,15 psi)
	Pa	Pa	Pa		10 Pa (0,0015 psi)
	mPa	mPa	mPa		10 mPa (1,5×10−6 psi)
	mbar	mbar	mbar		10 mbar (10 hPa)
		mb	mb
	dbar	dbar	dbar		10 dbar (100 kPa)
	bar	bar	(none)		10 bar (1.000 kPa)
	kBa	kBa	kBa		10 kBa (10 hPa)
	Ba	Ba	Ba		10 Ba (1,0 Pa)
	atm	atm	atm		10 atm (1.000 kPa)
	Torr	Torr	Torr		10 Torr (1,3 kPa)
	mmHg	mmHg	mmHg		10 mmHg (1,3 kPa)
	inHg	inHg	inHg		10 inHg (34 kPa)
	psi	psi	psi		10 psi (69 kPa)
FUEL EFFICIENCY
	unit	unit- code		notes		combinations
	kilometres per litre	km/l (km/L)		Use km/L to get "km/L"		km/l mpgimp km/l mpgus
	litres per 100 kilometres	l/100 km (L/100 km)		Use L/100 km to get "L/100 km"		l/100 km mpgimp l/100 km mpgus
	litres per kilometre	l/km (L/km)		Use L/km to get "L/km"		l/km impgal/mi l/km usgal/mi
	miles per imperial gallon	mpgimp				mpgimp mpgus
	miles per US gallon	mpgus (mpgUS, mpgU.S.)		Use mpgUS to get "US" Use mpgU.S. to get "U.S." mpgus will give "U.S." if spelling is set to US & "US" otherwise		mpgus mpgimp
	imperial gallons per mile	impgal/mi				impgal/mi
	US gallons per mile	usgal/mi (USgal/mi, U.S.gal/mi)		As above with the us vs US vs U.S.		usgal/mi
The mpgUS, mpgU.S., USgal/mi vs U.S.gal/mi, km/L, L/100 km and L/km variants work within combinations also (making 36 combinations in total).
POWER
Watts, kilowatts, milliwatts, etc. are supported. As is horsepower (English & metric). Use standard abbreviations as input code (lowercase hp for horsepower, for example)
POPULATION DENSITY
	unit	unit- code		notes		combinations
	inhabitants per square kilometre	PD/sqkm		PD stands for population density, i.e. humans (inhabitants)		PD/sqkm PD/sqmi
	per square kilometre	/sqkm		Used when the word 'inhabitants' would be inappropriate.		/sqkm /sqmi
	inhabitants per hectare	PD/ha				PD/ha PD/acre
	per hectare	/ha				/ha /acre
	inhabitants per square mile	PD/sqmi		PD stands for population density, i.e. humans (inhabitants)		PD/sqmi PD/sqkm
	per square mile	/sqmi		Used when the word 'inhabitants' would be inappropriate.		/sqmi /sqkm
	inhabitants per acre	PD/acre				PD/acre PD/ha
	per acre	/acre				/acre /ha
COST PER UNIT MASS
	unit	unit- code		notes		combinations
	dollars per pound	$/lb		"$" can mean US$, HK$, etc.		(none)
	dollars per kilogram	$/kg				(none)
	dollars per troy ounce	$/ozt		12 troy ounces in 1 troy pound		(none)

'per' units: kg/hl

When using a slash (/), a unit like kg/hl is recognized as kilograms per hectolitre and will be converted with other mass/volume units.

• {{convert-lat|1000|kg/hl}} → 1.000 kg/hl (100 lb/imp gal)

Units of difference: 10 °C higher; how much in °F

When a number is the measurement for a difference, one conversion is done. This may occur in temperatures (°C, °F, K). Compare this to a range, when two conversions are done.

The only available units of difference are: |C-change=, |F-change= and |K-change=.

• {{convert-lat|10|C}} → 10 °C (50 °F), regular temperature
• {{convert-lat|10|C-change}} → 10 °C (18 °F), difference (e.g., "The temperature changed from 30 into 40 °C")
• {{convert-lat|10-15|C}} → 10—15 °C (50—59 °F), range (e.g., "The temperature is between 10 and 15 °C")

Consistently, into multiple units:

• A rise of {{convert-lat|10|C-change|F-change K-change}} → A rise of 10 °C (18 °F; 10 K)

Multiple units: 1 ft 5 in

In input

Base document § Input multiples lists options for multiple unit input (like ft,in). It can catch predefined sets only (units that can be subdivided; e.g., yd into ft):

• {{convert-lat|1|yd|2|ft|3|in}} → 1 yd 2 ft 3 in (1,60 m)
• {{convert-lat|2|ft|3|in|cm}} → 2 ft 3 in (69 cm)
• {{convert-lat|1|lb|5|oz|g}} → 1 lb 5 oz (600 g)

In output

Available multiple-unit output options predefined, like ftin and ydftin. The full list is at § Output multiples.

• {{convert-lat|2|m|ftin}} → 2 m (6 ft 7 in)
• {{convert-lat|2|m|ft in}} → 2 m (6,6 ft; 79 in), using a space, returns the decimal point

Default behaviour, for comparison:

• {{convert-lat|2|m}} → 2 m (6 ft 7 in)

See also:

• {{hands}} a length used to measure horses
• {{Long ton}} a weight in ton, cwt, qr and lb

Currency per unit: $/mi → $/km

Using currency symbols in a $ per unit value, you can convert the per-unit:

• {{convert-lat|10|$/mi|$/km}} → $10/mi ($6,2/km)

You can set the currency in both values using |$=€:

• {{convert-lat|10|$/mi|$/km|$=€}} → €10/mi (€6,2/km)

It is not possible to convert the currency. So, this result (mixed currencies) is not possible: $15 per mile (€8.6/km) N

Parameter list

Parameter options for {{convert}}
Parameter	Value	Description	Note
|abbr=in	in	Use symbol for first (left-hand side) unit	Unit display
|abbr=off	off	Use name for all units	Unit display
|abbr=none	none
|abbr=on	on	Use symbol for all units	Unit display
|abbr=out	out	Use symbol for right-hand side unit (default)	Unit display
|abbr=unit	unit	Use symbol for all units when using scientific notation	Unit display
|abbr=values	values	Omit both the input and output units: show only the numbers	Unit display
|abbr=~	~	Shows both unit name and symbol	Unit display
|adj=mid|…	mid	User-specified text after the input unit; sets adj=on (adjective). Expects 1 unnamed parameter.	Word adding, adjective
|adj=on	on	Unit name is adjective (singular and hyphenated)	Grammar, adjective
|adj=pre|…	pre	User-specified text before input unit. Expects 1 unnamed parameter.	Word adding
|adj=ri0	ri0	Round input with precision 0	Input precision
|adj=ri1	ri1	Round input with precision 1	Input precision
|adj=ri2	ri2	Round input with precision 2	Input precision
|adj=ri3	ri3	Round input with precision 3	Input precision
|comma=5	5	Only use comma for thousands separator if 5 or more digits	Number format
|comma=gaps	gaps	Use gaps (space), not comma, for thousands separator	Number format
|comma=off	off	No thousands separator	Number format
|disp=b	b	Join input and output using " (...)" (default)	Join values
|disp=sqbr	sqbr	Join input and output using " [...]"	Join values
|disp=br	br	Join input and output using "<br/>"	Join values
|disp=comma	comma	Join input and output using ", "	Join values
|disp=or	or	Join input and output using " or "	Join values
|disp=number	number	Display output number only	Parts only
|disp=output number only	output number only
|disp=out	out	Display only output number and name/symbol	Parts only
|disp=output only	output only
|disp=preunit|…[|…]	preunit	Text to be inserted after value and before units, for both input and output, with optionally different text for output. Expects 1 or 2 unnamed parameters.	Word adding
|disp=table	table	Output is suitable for a table cell with align="right"	Table columns
|disp=tablecen	tablecen	Output is suitable for a table cell with align="center"	Table columns
|disp=unit	unit	Display input name/symbol only (not input number, not output)	Parts only
|disp=unit2	unit2	Display output name/symbol only (not input; not output number)	Parts only
|disp=x|…	x	Join input and output using user-specified text	Word adding
|frac=N	N	Show imperial number in fractions, denominator=N	Number format, fraction
|input=P2048	P2048 (e.g.)	Reads and converts Wikidata property	Inside template
|lk=in	in	Link left-hand side unit name or symbol	Unit link
|lk=on	on	Link all unit names or symbols (but not twice for the same unit)	Unit link
|lk=out	out	Link right-hand side unit name or symbol	Unit link
|order=flip	flip	Inverts order of input, output measurements (conversion first)	Order
|order=out	out	Displays output units in the order entered, skipping input unit	Order
|qid=Q1056131	Q1056131 (e.g.)	Reads Wikidata property from Wikidata item	Inside template; testing
|qual=Q613628	Q613628 (e.g.)	Qualify Wikidata property
|round=5	5	Rounds calculation to the nearest multiple of 5	Output precision
|round=25	25	Rounds calculation to the nearest multiple of 25	Output precision
|round=each	each	In a range, each number is rounded by the default rounding	Output precision
|sigfig=N	N	Round output number to N significant figures (N is a positive integer)	Output precision
|sortable=on	on	Adds invisible sort key	Table sort
|sp=us	us	Use U.S. spelling ("meter" instead of default "metre")	Spelling U.S. names
|spell=in	in	Spell input number in words	Spelling numbers
|spell=In	In	Spell input number in words with first letter uppercase	Spelling numbers
|spell=on	on	Spell input and output numbers in words	Spelling numbers
|spell=On	On	Spell input and output numbers in words with first letter uppercase	Spelling numbers
|$=€	€	Replace $-sign with a currency sign, for example in €/hectare	Cost per unit No currency conversion happens
|debug=yes	yes	Debugging only. In a sortable table: show the normally hidden sort key	Table sort
|disp=flip	flip	Deprecated. Use |order=flip	Order
|sing=		Deprecated. Use |adj=	Plurals

Deprecated options

This list: 

Deprecated options should not be used. They may produce incorrect or undesired results and there is no guarantee that they will be supported in the future.

• disp=flip is deprecated. Use order=flip instead
• sing= is deprecated in any situation. Use adj= instead
• Range separator |xx| is deprecated (not compliant). Use |x| instead
• Range separator |*| is deprecated (not compliant). Use |x| instead

TemplateData

Ovo je TemplateData dokumentacija za ovaj šablon, korišćena u Vizuelnom uređivaču i u drugim alatkama; pogledajte mesečni izveštaj o greškama za ovaj šablon.

TemplateData za Convert-lat

Converts measurements to other units.

Параметри шаблона[Уреди податке о шаблону]

Параметар		Опис	Врста	Статус
value	1	the value to convert	број	необавезно
from unit	2		кратак текст	необавезно
to units	3	the unit to convert into	кратак текст	необавезно
precision or suffix	4	significant digits after decimal dot or, if negative, exponent of ten	број	необавезно
link units	lk	“on” all, “in” input, “out” output or “off” no units Подразумевано off	кратак текст	необавезно
abbreviation	abbr	display for the units: “on” unit symbols, “off” all unit names in full words, “in” input unit symbol, “out” abbreviated output units, “values” no units at all Подразумевано out	кратак текст	необавезно
spelling	sp	“us” display U.S. spelling of unit names	кратак текст	необавезно
adjective	adj	adjective form (singular unit name appended by hyphen) “on” or “mid” to put conversion at end	кратак текст	необавезно
conversion	disp	display conversion result: “or” after ‘or’, “x” with custom prefix and suffix, “b” in parentheses, “table”/“tablecen”, “output only” alone, “output number only” alone and without unit, “unit” not at all but input unit; if the value is a number it is used as precision Подразумевано b	кратак текст	необавезно
ordering	order	“flip” returns converted value first, input value second.	кратак текст	необавезно
significant figures	sigfig	number that sets the number of significant figures	број	необавезно
rounding output	round	“5” rounds the output number to nearest multiple of 5, “25” to nearest multiple of 25, “each” rounds each number in a range	кратак текст	необавезно
thousands separator	comma	Sets or suppresses thousand separator in the numbers. “off” = no separator; “gaps”: use space not comma; “5” and “gaps5”: only add separator when number > 5 positions (10,000 or more) Подразумевано on	кратак текст	необавезно
sort key	sortable	“on” generates a hidden sort key	кратак текст	необавезно

See also

• {{Cvt-lat}}
• {{SI units-lat}}

Горња документација је укључена са странице Шаблон:Convert-lat/док. (уреди | историја)
Уредници могу да експериментишу на подстраницама песак (направи | дуплирај) и тест (направи) овог шаблона.
Категорије додајите на подстраницу /док. Подстранице овог шаблона.